Mitsubishi Heavy FDU250VSAWVH High Static Pressure Ducted Air Conditioner

Mitsubishi Heavy FDU250VSAWVH High Static Pressure Ducted Air Conditioner is presented with the equipment set specifications for commercial projects with extensive ductwork and substantial air distribution requirements. We assess room load, occupancy, ceiling layout, air distribution and electrical infrastructure together before selecting the equipment.

Nominal cooling 25,0 kW (7,2-28,0); heating 28,0 kW (6,7-31,5). 3 phase, 380-415 V, 50 Hz; high static pressure ducted type. These figures must be assessed together with the project heat load and airflow calculations.

EER 3,03; COP 3,75; SEER 4,88; SCOP 3,54. The published performance figures are listed in detail in the technical information section.

We coordinate the site survey, capacity verification, duct or pipe routes, drainage and infrastructure assessment before commissioning within the same project process. Equipment selection is therefore assessed together with its installation conditions.

The listed price is for the equipment set only. Installation, copper pipework, duct fabrication, electrical infrastructure, drainage and the site survey are excluded. Contact our team for a project-specific site survey and installation quotation.

Technical information

Set: FDU250VH indoor unit + FDC250VSA-W outdoor unit.

3 phase, 380-415 V, 50 Hz; high static pressure ducted type.

Nominal cooling 25,0 kW (7,2-28,0); heating 28,0 kW (6,7-31,5).

EER 3,03; COP 3,75; SEER 4,88; SCOP 3,54.

Indoor unit 379 x 1600 x 893 mm, 88 kg; outdoor unit 1505 x 970 x 370 mm, 145 kg.

Indoor sound pressure 52/50/47/45 dB(A); outdoor sound pressure 58/62 dB(A).

Standard static pressure 72 Pa, maximum 200 Pa.

R32, 5,10 kg; standard liquid pipe diameter 12,7 mm, gas 22,2 mm; maximum pipe length 70 m.

For a 70 m pipe run, apply the catalogue pipe sizing note: the gas line increases to 28,5 mm beyond 35 m.

A filter and drain pump are not included; RC-E5 is the standard controller.